Stump/Soft Rock Cutting Head

When you’re cutting the softer side of rock give these heads a try. The head is 1-1/2” thick A36 steel plate at the over cutters. The face cutters are mounted through a 7/8” thick plate and retained with a roll pin on the back side of the head. Like our other cutting heads, these too have a 100% cutting pattern. These heads are made with two banks of replaceable cutters and lead bits. Each bank is made of two rows of cutters insuring 100% cutting pattern. The over cutters and hex drive are also replaceable. Optional head leads are available and all of our heads can be sold with extra banks.

stump-soft-rock