Transition Knife Reamer

The Barbco Transition Knife Reamer is your go to attachment for increasing your casing diameter by great lengths. Provided you are in soft, non compact ground conditions, this head will allow you to continually increase your casing diameter to your desired size.

Request a Quote

HORSEPOWER

39,647

FT. LBS. TORQUE

209,230

POUNDS OF THRUST

Safety Features

Hook Rollers
Hook rollers at the base of the machine anchor it securely to the track.
Emergency Stop
Quickly shut down the engines with the tethered emergency stop switch.
Durable Hydraulic Hoses
Hydraulic hoses withstand extreme pressure and protect against bursts.
Master Pusher Opening Shield
The master pusher opening is equipped with a door to help shield personnel from rotating spoil ejections.
Rollover Anticipation Shut-down
To protect your machine operators, our rollover anticipation shut-down module (RASM) uses state-of-the-art technology to anticipate rollover forces and immediately shutdown the engine. Any incidents will record in the RASM software.

Master Pusher Opening Shield
The master pusher opening is equipped with a door to help shield personnel from rotating spoil ejections.
Tethered and Wireless Remote Control (optional)
Operate your machine safely outside of the pit with a tethered or wireless remote control.
Vandalism Shield (Optional)
Add a vandalism shield to protect against damage, theft and inclement weather.

Manufacturer Comparison

Model	Horsepower	Torque	Thrust
24/30-150	46	29,870	150,000
30 Power Plus	45	28,724	200,000
30/36B	48	25,500	230,000
30/36-200	64	39,679	209,230

Product Specifications

Power Train
Engine	Deutz D2011L04I Air Cooled Diesel with Electric Start
	64.1 HP @ 2,800 RPM Continuous Duty Rating
	140.14 Ft. Lb. Peak Torque @ 1,700 RPM
Clutch	10-inch Diameter
Auger Drive	3" Hex Drive

Transmission
Type	T-18 4 Speed
1st Gear	6.32:1 Ratio
2nd Gear	3.09:1 Ratio
3rd Gear	1.69:1 Ratio
4th Gear	1.00:1 Ratio
Reverse	7.44:1 Ratio

Maximum Output Torques and Auger Speeds
1st Gear	39,679 ft-lbs. @ 6 RPM
2nd Gear	19,400 ft-lbs. @ 12.28 RPM
3rd Gear	10,610 ft-lbs. @ 22.45 RPM
4th Gear	6,278 ft-lbs. @ 37.94 RPM
Reverse	46,710 ft-lbs. @ 5.10 RPM

Gearbox
Fairfield S10B	44:8:1 Ratio

Hydraulic System
Pump	Danfoss K38C – 26.6 GPM @ 2,800 RPM
	3,770 PSI Continuous/5,075 PSI Intermittent
	Pressure Compensated Load Sensing System
Cylinders	Two 6" Bore x 36" Stroke
	209,230 Lb. @ 3,700 PSI
	286,984 Lb. @ 5,075 PSI Intermitten^*
Work Range	4" through 36"

Filters
Return	10 Micron Replaceable Element

Dimensions - 30" Mode
Center Line	19"
Height	51.75"
Width	48"
Length	120"

Dimensions - 36" Mode
Center Line	22"
Height	54.75"
Width	48"
Length	120"

Weights
Base Unit	2,500 lbs.
Sub-Frame	2,400 lbs.
Master Track	1,160 lbs.
Extension Track	1,050 lbs.
30" Master Pusher	673 lbs.
36" Master Pusher & Lift Kit	900 lbs.

*Pump life expectancy diminishes rapidly. May void warranty.